Product Description: A 100% solids Heated Plural Component Polyurea Spray System designed for  applications requiring flexibility and good abrasion resistance such as metals, foams, geotextiles and concrete.

Material: Polyurea Hybrid

Mix Ratio:                                   Part "A"          Part "B"

By Weight:                                      100                    90         

By Volume:                                    100                  100

Package Sizes:  Packaged/Sold by Weight

Kit                                                 Part "A"          Part "B"

  38 kg. (A+B)                               20.0 kg.         18.0 kg.

418.18 kg. (A+B)                        218.18 kg.       200.00 kg.

Viscosity @ 21oC(70oF)           Part AA@     PartAB@

                      1150cps      800cps

Pot Life:                    8 to 12 seconds

Tack Free:                  less than 35 seconds

Hardness:                  85 + 5  Shore A

Impact Resistance: Greater than 160 inch - pounds (ASTM D-2794)

Tear Strength:          200 pli Die AC@

                                 50 pli ASTM D-470

Tensile Strength:     2000 psi (ASTM D-412)

Elongation:               375% (ASTM D-638)

Abrasion Resistance:  120 grams weight loss per 1000 cycles, H18 wheel, at 1000 gms. (ASTM D1044)

Operating Temperature:  -56oC (-70oF) to 93oC (200oF)

Fungus Resistance:                Non-nutrient

Elcometer Adhesion:

                    Steel:       > 900 psi (ASTM D-4541)

                  Concrete:     > 450 psi (ASTM D-4541)


Vapor Transmission:   < 0.10 (ASTM E96-80)

Normac NR-8011 Parts "A" and  "B"

Weight of Cured Coating: 29 gm./m2 @ 25 microns 0.60 lbs. per 100 ft.2 at .001" thick

Ultimate Cure:    5 days at 21oC (70oF)

Recoat Times:    Continuous: Maximum 12 hours

Mixed Solids Content: 100%

Flash Point:  None, Normac NR-8011 Part "A" and "B" are both non-flammable in shipping, storage and application. See Material Safety Data Sheet (MSDS).

Application:   Normac NR8011 is applied through heated plural component 1:1 equipment.  The recommended spray gun is a Probler, Gusmer or Fusion gun  with the appropriate mixing nozzle or chamber. This system uses air pressure to purge the mix chambers and tips.  No solvent is required during application.  Typical operating temperatures are between 60oC (140oF) to 71oC (160oF).  Spraying pressure should be 2500psi minimum for best physicals. Air requirements for the main pumps is 90 lbs. Electrical is 220v single phase and 110v.

Maximum Recoat Times: 18 hours @ 21C.

Surface Preparations and Primers:  Standard surface preparation procedures such as grit blasting to near white metal or acid etching concrete is required for good mechanical bonding of the NR-8011 Sprayable Polyurea System. See "Normac Surface Preparation Guide for Urethane Coatings".


NR-9500/NR-9501: A two component, single coat air curing solvent based primer.

NR-9600: A two component wash primer base for NR-9500.

EP-100: A two component 100% solids primer for concrete.

Refer to specific primer/adhesive data sheets.

Theoretical Coverage:

34 m2 @ 25 microns DFT (166 ft2/lb. at .001"DFT).




Product Menu  





© Normac Adhesive Products Inc.