NORMAC PLURAL COMPONENT 100% SOLIDS
SPRAYABLE URETHANE SYSTEMS

These coatings are 100% solids versions of our solvent based sprayable urethane systems. Because of their high reactivity (pot life = 30 seconds) they must be applied through heated plural component spray equipment. The heat is necessary to break the viscosity of the materials so that atomization (spraying) and good mix can occur. The spray gun we use is an air purge type with dynamic mixing. This eliminates the use of solvent to clean lines and gun after each spray application. Cleaning solvents are only used to clean gun parts at the end of the day and to purge spray hoses and equipment for long term storage.

Our 100% solids Urethane Coating Systems are packaged by weight in 200 Litre/55 gallon drum kits consisting of Part A (the resin or iso) and Part B (the curative). Colouring is added only to the Part B.

The advantages to using 100% solids urethane coating systems are faster productivity (faster build per coat and drying times), environmentally friendly (no solvents), and less costly than the solvent based systems.

 

   

Language  

   

Login  

   
© Normac Adhesive Products Inc.